「大慶快速門」堆積門絕對值編碼器接線調試辦法



Connection debugging method of absolute encoder for Daqing Express Gate stacking door

編碼器是目前快速門當中最長使用的限位裝置。



Encoder is the longest used limit device in the fast gate at present.

分為增量式和絕對值式兩種。



It can be divided into two types: incremental and absolute.



二者與不同的變頻器調配使用的調試辦法會有所不同，因此，今日的文章不通用于所有口操控器品牌。



They will be different from the debugging methods used in different frequency converter allocation. Therefore, today's article is not applicable to all mouth controller brands.



絕對型旋轉光電編碼器，因其每一個方位絕對唯一、抗干擾、無需掉電回憶，現已越來越廣泛地應用于各種工業(yè)系統(tǒng)中的視點、長度丈量和定位操控。



Absolute rotary photoelectric encoder, because of its absolutely unique orientation, anti-interference and no power-down memory, has been more and more widely used in the viewpoint, length measurement and positioning control of various industrial systems.

「大慶快速門」堆積門絕對值編碼器接線調試辦法



Connection debugging method of absolute encoder for Daqing Express Gate stacking door



1 變頻器操控形式改為絕對值編碼器形式（C31.05=2），把編碼器連接好。



1. Change the control mode of frequency converter to absolute encoder (C31.05=2), connect the encoder well.



（如未連接，變頻器會呈現 A.LC報警提示）。



If not connected, the frequency converter will present an A. LC alarm.



2 確定編碼器裝置方位。左邊設定C31.06=1。右側設定C31.06=0。



2. Determine the orientation of the encoder. Set C31.06 = 1 on the left. On the right, set C31.06 = 0.



（注：絕對值編碼器裝置在減速機上為例。）



(Note: Absolute encoder device in reducer as an example.)



3 短接端子上的G和X4，進行下限及上限的方位設定。



The G and X4 on the short terminal set the position of the lower limit and the upper limit.



4 下限設定：點動下降，調整門到下限方位。



4 lower limit setting: click down, adjust the door to the lower limit orientation.



按下急停按鈕，按住下降按鈕2秒。變頻器呈現AT0提示，下限設定結束。



Press the stop button and hold down the drop button for 2 seconds. The transducer presents AT0 prompt and the lower limit setting ends.

5 上限設定：點動上升，調整門到上限方位。按下急停按鈕，按住上升按鈕2秒。



5 upper limit setting: point up, adjust the door to the upper limit orientation. Press the stop button and hold the up button for 2 seconds.



變頻器呈現AT0提示，上限設定結束。



The transducer presents AT0 prompt and the upper limit is set.



（如需求半開/全開功用，設置C31.08=1。



(For half-open/full-open functions, set C31.08 = 1.



在“手動”設置半開上限，在“自動”設置全開上限，操作辦法相同）。



Set half-open upper limit in "manual" and full-open upper limit in "automatic", the same way of operation.



6 移除G和X4短接線，能夠進行正常的開門/關門操作。



6. Remove G and X4 short wiring to perform normal open/close operation.



如您需求訂購、維修快速門能夠撥打龍盛門業(yè)客服電話咨詢。



If you need to order and repair the express door, you can call Longshengmen Customer Service Telephone for consultation.



本廠有海利普，士林，三菱，SEJ，SFT等品牌操控器調試說明書，免費為用戶提供。



Our factory has Hailip, Shilin, Mitsubishi, SEJ, SFT and other brand operators debugging instructions, free of charge for users.



龍盛門業(yè)在浙江省的辦事處分布：哈爾濱，齊齊哈爾濱，雞西，鶴崗，雙鴨山，大慶，伊春，佳木斯，七臺河，牡丹江，黑河，綏化，大興安嶺，北安，五大連池，安達，肇東，海倫，加格達奇，新林，漠河等地。



The offices of Longshengmen in Zhejiang Province are Shenyang, Dalian, Anshan, Fushun, Benxi, Dandong, Jinzhou, Yingkou, Liaoyang, Chaoyang, Tieling, Panjin, Huludao and Fuxin.